EXONE F400 By ALDES
Mechanical ventilation hse
Helicocentrifugal box fan for smoke and heat evacuation complying with EN 12101-3 class F400 (120)
- 8 sizes with capacities from 100 to 18.500m3/h
- Panelling in galvanised sheet metal
- Motor support in galvanised sheet metal
- Class F electric motor with IP55 protection
APPLICATION FIELDS
Rooms subject to UNI 9494 regulations where it is necessary to keep escape routes and accesses to the rooms affected by thefire free from smoke, delay and/or prevent the conditions of generalised development of the fire and thus facilitate the operations of the fire-fighting teams
INSTALLATION
Exone is installed indoors or outdoors.outdoors
A series of accessories allow the application to be customised
- Rectangular circular conversion on the expulsion
- Fixing frame for installation on masonry surfaces
- Base frame for installation on non-masonry surfaces
- Possibility to position the motor axis horizontally or vertically
- Anti-vibration feet and supports
OPTIONS
- Safety pressure switch 1/2 speed aeraulically connected
- Pre-wired safety switch
- Double wall insulation
ACCESSORIES
- Motor protection recommended in case of outdoor installation
- Rain visor on the expulsion
- Pre-mounted feet: allow the fan to be fixed to the ground
- Anti-vibration mounts: isolate the fan from vibrations
- Non-return damper
- Fixing frame allows the Exone fan to be installed on a masonry base
- Base for horizontal roof installation: allows installation of the fan on horizontal surfaces
- Intake plenum: used when there is a need for the flow of smoke to be perpendicular to the axis of the motor
- Circular rectangular ejection allows the connection of a circular expulsion mesh on the rectangular expulsion of the fan
- Connection flange on the suction side: for connecting a circular duct and a flat surface