VELONE F400 By ALDES
Mechanical ventilation hse
Smoke evacuation tower complying with EN12101-3 class F400 (120)
Velone complies with CE marking.
- Backward-bladed impeller in galvanised sheet metal
- Base frame in galvanised sheet metal, 10x10 mm protection grid and ABS cover
- Electric motor with IP55 protection rating in accordance with EN 60529
- Insulation class F in accordance with EN 60034-1
- Performances flow rates from 500 to 27 000 m3/h
FIELDS OF APPLICATION
Rooms subject to UNI 9494 regulations or more generally where it is considered appropriate and a priority to evacuate smoke and heat and to safeguard escape routes, to contain thermal effects onstructures and to reduce the damage caused by combustion gases and toxic substances generated by the fire
INSTALLATION
Velone is installed outdoors on a flat or sloping surface by means of a special base
A series of accessories allow the application to be customised:
- rain protection kit
- vertical ejection kit
- plinth with hinge
- plinth for installation on horizontal or sloping roof
OPTIONS
- adjustable pressure switch
- pre-wired safety switch
ACCESSORIES
- Rain protection kit: allows the duct to be protected from water penetration when the tower is in operation
- Vertical ejection kit: allows smoke and heat to be directed upwards
- Hinged base: facilitates access to the duct and impeller thanks to the possibility of turning the tower upside down
- Base frame for horizontal roof installation for mounting the tower on a flat surface
- Base frame for sloping roof installation (specify slope when ordering)
- Frame for circular duct installation: connects the tower to a circular duct
- Non-return damper blocks the passage of air when the tower is stationary