SMARTIA M7 By Alumil
Thermal insulate facade system
M7 is a thermal insulated system for Energy Efficiency curtain walls that offers quality constructions with an excellent value for money ratio and meets all stability and safety requirements.
- 50 mm width of mullions and transoms
- High thermal insulation thanks to special isolator, making the system ideal for all climate regions
- Structural glass solution with gaskets (SGG) or silicone (SSG), with the same mullions and transoms
- Glazing thickness from 28mm up to 50mm
- The profiles thickness vary from 1,7 – 2,0mm (6mm in the bigger profiles) so as to offer high values of inertia
- The transom screws are covered by the transom gasket, thus minimizing water and air penetration problems
- Low fabrication cost due to accessories and ease of fabrication
- Includes a water evacuation system (front installation)
- Special supports for shading aluminium blades are available
- All kind of opening windows can be installed (parallel projected, top hung, inwards tilt & turn, concealed sash tilt & turn, seamless inwards tilt & turn)
- All kinds of surfaces can be constructed (inclined, polygonal)
- Combines with all types of doors from M11000 system
PROFILE CHARACTERISTICS
Exterior visible width 50 mm
Mullion depth 28 - 267 mm
Transom depth 16,550 - 266 mm
Glazing Stick type with EPDM gaskets
Glass thickness 28 - 50 mm
Mullions max inertia Ix=1483 Iy=61,3 cm4
Transoms max inertia Ix=1483 Iy=61,3 cm4
Cross section thickness 5 mm
SYSTEM CHARACTERISTICS
Type of system Insulated
Uf
Exterior aesthetics Standard (with cap), Structural
Types of vent Fix
Top hung window
POW window
Inwards hinged window
Concealed hinged window
