CAP ARREGHINI TRAVERTINO DRY

Breathable Paint for renovation and restoration with antique faux finish

ADD TO WISHLIST OR PROJECT

More on Brand

CAP ARREGHINI

Italy
Contact the company
Website
Overview
Lines
Name of product/article

TRAVERTINO DRY

Type

Breathable Paint for renovation and restoration with antique faux finish

Travertino Dry is a powder wall coating for outdoors and indoors, made with a mineral binder which allows you to get a finishing very similar to that of the ancient plasters in Venice buildings.‎
The product appears always different, characterized by tones and colour effects that depend on the abilities of the decorator; Travertino Dry is characterized by the use of mineral grain size max.‎ 1 mm.‎ Travertino Dry creates a layer of high thickness, resistant to weathering and has excellent breathability.‎ The product is particularly suitable for restoration work, even for buildings of particular historic and artistic interest.‎
COLOUR RANGE
White.‎
The colour could vary slightly from one production batch to the next; it is therefore important to finish the job with the same batch.‎
Finishing: Kalahari as per colour chart ( just to fade in colour).‎
TYPICAL USE
It can be applied on:
- New and old plasters based on hydraulic binders.‎
- Old paints and coatings mineral in nature, dry, compact, absorbent and cohesive.‎
- Conglomerates of various mineral kinds, only if absorbent.‎ Surfaces should be adequately prepared following the procedures of paragraph SURFACE PREPARATION 1.‎ Do not apply on freshly painted surfaces.‎
- It's not recommended for use on outdoor concrete surfaces as the product, for its high permeability, has no protective powers against the aggression of carbon dioxide, the main cause of concrete deterioration.‎
TOOLS
Stainless steel trowel, plastic trowel, sponge float.‎ Tools should be cleaned immediately after use with water.‎
THINNING Travertino Dry should be mixed for 2 minutes with about 6 liters of clean water per 25 kg bag.‎
COVERAGE 2,5-3 kg/m2
DRYING Dry to touch 2-3 hours; overcoatable after 12 hours
APPLICATION TEMPERATURE +5°C +30°C
STORAGE +5°C +30°C

Further info from manufacturer on TRAVERTINO DRY

Mineralcap Collection by CAP ARREGHINI
You might also like...
Recently Viewed

Save to:
Save to: