ISOLA | Rectangular office desk
Rectangular office desk
Worktops made of scratch-resistant melamine wood conglomerate, thickness 30 mm, in solid grey or veined birch finishes.
All the tops are edged in ABS 30/10 with a bevelled profile on all sides.
Metal structure with "T" shaped metal leg. A shape reduced almost to its pure function, which from a production point of view is obtained by simple production processes such as press-bending, punching and continuous wire welding of suitably shaped metal sheets.
All the components of the leg, vertical stem, foot and upper fixing bracket are made of 20/10 thick metal sheet and are painted with epoxy powders without heavy metals in the Bianco RAL 9003 finishes, with a smooth matt effect, or in the Grigio Bonderizzato finish with a glossy effect.
The vertical frame has dimensions of 70x50 mm and is suitably shaped and drilled for vertical wiring.
It is also equipped with a neudimium magnet that makes it possible to attach the cover of the cable compartment to it.
The latter element is made of 10/10 thick sheet metal, bent and painted in the same finish as the other components.
By means of continuous wire welding to the vertical shaft, the metal foot is made integral, which is equipped with polypropylene adjustment feet with a diameter of 60 mm and a thickness of 10 mm.
The telescopic beams have a section of 30x40 mm, are constructed so as to allow the horizontal passage of cables for wiring and have heads and flange on both sides with parallel pairs of inserts for bayonet linkage on the slots on the vertical shaft.
Due to their specificity, the telescopic beams also allow the use of the same shared leg on two contiguous positions joined together.
The worktops are made of 30 mm thick melamine in the Grey and Birch finishes and have a 3 mm ABS edge on the four sides.