NINFA 175 - Inside fixing on the supporting wall
Glass and aluminium balustrades of minimal design.
System designed to be fixed inside the walls.
RECOMMENDED USE DESTINATIONS:
The certificate from the certification bodies guarantees the usual safety for Ninfa 175:
• 200 kg/m (tested up to 300 kg/m) with 8+8 mm glass (temp. ind),PVB max H 110 cm
• 300 kg/m (tested up to 450 kg/m) with 10+10 mm glass (temp. ind), PVB max H 120 cm
Ninfa 5 is a product tested and certified at the Polytechnic of Milan.
The system is designed to work even with non-tempered glass.
With non-tempered laminated Stratobel Strong AGC glass, it exceeds the UNI 11678 class of 200 kg/m.
With tempered laminated glass, it exceeds the UNI 11678 class of 300 kg/m.
ASSEMBLY IN JUST 4 STEPS:
1 –Drill the profile:
every 30 cm (thrust resistance class 200 kg/m)
every 20 cm (thrust resistance class 300 kg/m).
Insert the fastening screws and the rigid gasket in their place.
2 – Insert the glass in the profile.
3 – Adjust the glass with the fastening screws. Clamp down the internal and external adjusting screws in order to fasten the glass.
4 –Check that everything is well done. Snap-fit the cladding, which already has the gaskets on.
THE FIFTH GENERATION
Ninfa 5 and its family. Totally adjustable systems on one side only.
The new Ninfa range with profiles designed to be even more performing and to adapt even better to each use destination.
NINFA 5, NINFA 55, NINFA 105, NINFA 175, NINFA 185, NINFA 195, NINFA STADIO