Ninfa 195 - INDICATED FOR HIGH PERFORMANCE ON FASCIA MOUNTING
Glass and aluminium balustrades of minimal design.
Balustrade with fascia mounting system to maximize the walkable surface of balconies and terraces and offer maximum visibility from the inside.
RECOMMENDED USE DESTINATIONS:
The certificate from the certification bodies guarantees the usual safety for Ninfa 195:
• 300 kg/m (tested up to 450 kg/m) with 10+10 mm glass (temp. temp. ) PVB, max H 110 cm
• 300 kg/m (tested up to 450 kg/m) with 12+12 mm glass (temp. temp. ) PVB, max H 130 cm
• 300 kg/m (tested up to 450 kg/m) with 10+10 mm glass (temp. temp. ) SG, max H 130 cm
• 300 kg/m (tested up to 450 kg/m) with 12+12 mm glass (temp. temp. ) SG, max H 150 cm
300 kg/m (testato fino a 450 kg/m) con vetro 12+12 mm (temp. temp. ) SG h max 150 cm. This last solution is valid both for the C3 class and for the UNI EN 13. 200-3 +20% (stadiums and sports centres).
Ninfa 5 is a product tested and certified at the Polytechnic of Milan.
The system is designed to work even with non-tempered glass.
With non-tempered laminated Stratobel Strong AGC glass, it exceeds the UNI 11678 class of 200 kg/m.
With tempered laminated glass, it exceeds the UNI 11678 class of 300 kg/m.
ASSEMBLY IN JUST 4 STEPS
1 –Drill the profile:
every 30 cm (thrust resistance class 200 kg/m)
every 20 cm (thrust resistance class 300 kg/m).
Insert the fastening screws and the rigid gasket in their place.
2 – Insert the glass in the profile.
3 – Adjust the glass with the fastening screws. Clamp down the internal and external adjusting screws in order to fasten the glass.
4 –Check that everything is well done. Snap-fit the cladding, which already has the gaskets on.
THE FIFTH GENERATION
Ninfa 5 and its family. Totally adjustable systems on one side only.
The new Ninfa range with profiles designed to be even more performing and to adapt even better to each use destination.
NINFA 5, NINFA 55, NINFA 105, NINFA 175, NINFA 185, NINFA 195, NINFA STADIO