NINFA 55 By FARAONE
NINFA 55 - Fixing on a wall or for places where there is the possibility of falling into the void.
Glass and aluminium balustrades of slender design.
The smallest of the new range with minimal lines. Suitable for installation on walls. Fully adjustable on the inside.
RECOMMENDED USE DESTINATIONS:
Fixed to the floor
Fixed in the floor
The certificate from the certification bodies guarantees the usual safety for Ninfa 55:
• 200 kg/m (tested up to 300 kg/m) with 6+6 mm glass (temp. ind), max H 50 cm
• 200 kg/m (tested up to 300 kg/m) with 8+8 mm glass (temp. ind), max H 80 cm
Ninfa 5 is a product tested and certified at the Polytechnic of Milan.
The system is designed to work even with non-tempered glass.
With non-tempered laminated Stratobel Strong AGC glass, it exceeds the UNI 11678 class of 200 kg/m.
With tempered laminated glass, it exceeds the UNI 11678 class of 300 kg/m.
ASSEMBLY IN JUST 4 STEPS
1 –Drill the profile:
every 30 cm (thrust resistance class 200 kg/m)
every 20 cm (thrust resistance class 300 kg/m).
Insert the fastening screws and the rigid gasket in their place.
2 – Insert the glass in the profile.
3 – Adjust the glass with the fastening screws. Clamp down the internal and external adjusting screws in order to fasten the glass.
4 –Check that everything is well done. Snap-fit the cladding, which already has the gaskets on.
THE FIFTH GENERATION
Ninfa 5 and its family. Totally adjustable systems on one side only.
The new Ninfa range with profiles designed to be even more performing and to adapt even better to each use destination.
NINFA 5, NINFA 55, NINFA 105, NINFA 175, NINFA 185, NINFA 195, NINFA STADIO