FARAONE NINFA 5

Glass balustrade

ADD TO WISHLIST OR PROJECT

More on Brand

FARAONE

Italy
Contact the company
Website
Overview
Collection
Name of product/article

NINFA 5

Type

Glass balustrade

Materials

Glass

Design Year
2019

NINFA 5, THE PRESENT AND THE FUTURE OF THE GLASS BALUSTRADES.‎
"The Result of a Teamwork".‎
The progenitor of the series.‎
Ninfa 5 was created to overcome the tests required by the regulations, even with laminated tempered glass (by AGC).‎
Assembly from the inside only.‎
Also available with integrated LED system.‎

RECOMMENDED USE DESTINATIONS:
Fixed to the floor
Fixed in the floor

The Ninfa 5 system also respects all the pluses of the fourth generation:
• assembly and adjustment only from the inside;
• absolute assembly speed, even ameliorated;
• also designed to house the LED;
• Faraone technology.‎

SAFETY
The certificate from the certification bodies guarantees the usual safety for Ninfa 5:
A multiuse profile for 10+10 (tempered or untempered) glass or 12+12 tempered glass.‎
The new accessories for fixing the glass, the dimensions, the geometry, the elasticity and the robustness are the results of the design in order to pass the test during the examinations done according to the Ministerial Decree of 17/01/2018 and the UNI 11678 norms of 15/05/2017.‎
• 200 kg/m (tested up to 300 kg/m) with untempered 10+10 mm Stratobel Strong glass, max H 110 cm
• 300 kg/m (tested up to 450 kg/m) with 10+10 mm glass (temp.‎ ind), max H 110 cm
• 300 kg/m (tested up to 450 kg/m) with 12+12 mm glass (temp.‎ ind), max H 180 cm  
Ninfa 5 is a product tested and certified at the Polytechnic of Milan.‎

The system is designed to work even with non-tempered glass.‎
With non-tempered laminated Stratobel Strong AGC glass, it exceeds the UNI 11678 class of 200 kg/m.‎
With tempered laminated glass, it exceeds the UNI 11678 class of 300 kg/m.‎

ASSEMBLY IN JUST 4 STEPS  
1 –Drill the profile:
every 30 cm (thrust resistance class 200 kg/m)
every 20 cm (thrust resistance class 300 kg/m).‎
Insert the fastening screws and the rigid gasket in their place.‎
2 – Insert the glass in the profile.‎
3 – Adjust the glass with the fastening screws.‎ Clamp down the internal and external adjusting screws in order to fasten the glass.‎
4 –Check that everything is well done.‎ Snap-fit the cladding, which already has the gaskets on.‎

THE FIFTH GENERATION
Ninfa 5 and its family.‎ Totally adjustable systems on one side only.‎
The new Ninfa range with profiles designed to be even more performing and to adapt even better to each use destination.‎
NINFA 5, NINFA 55, NINFA 105, NINFA 175, NINFA 185, NINFA 195, NINFA STADIO

Further details

NINFA 5 is a system suitable for the following types of glass:

- for 10/10 untempered glass* for category 2 and tested up to 3 kN/m;

- for 10/10 tempered glass for category 3 and tested up to 4.5 kN/m;

- for 12/12 glass and therefore tested for greater heights and in the various required categories.

NINFA INNOVATION 5

The collaboration between Faraone and AGC, an international company specialized in the production and processing of flat glass, gives you a novelty: THE POSSIBILITY TO USE 10.10 UNTEMPERED* GLASS on balustrades respecting the new regulations.

The project has matured at the end of 10 years since the birth of the NINFA project and thanks to the experience of over 420,000 meters of NINFA glass balustrade systems installed from 2008 to 2018 with total satisfaction of customers and installers.

*STRATOBEL STRONG by AGC

NINFA 5 with 10.10 Stratobel Strong glass has passed the tests up to class C2 (2 kN - tested to 3 kN). Certifications completed at the Polytechnic of Milan.

- a new profile that can follow the deflection of the Float glass during the bending of the plate;

- a system with an adequate rigidity to withstand the new UNI 11678 standards;

- a high technology with accessories suitable to cushion the pendulum stroke, all without causing the glass sheets to break and in compliance with the regulations in force;

- new system designed for Stratobel Strong glass.

NINFA 5, ALSO WITH UNTEMPERED STRATOBEL STRONG GLASS by AGC.

The use of untempered Stratobel Strong glass has the following advantages:

- versatility: workable by every glassmaker;

- attention to detail: excellent edge finishing and other aesthetic advantages;

- glass resistance up to category C2 (200 kg/m + 50% –> 300 kg/m).

The system is patented.

NINFA 5, WITH TEMPERED GLASS THE CLASSIC
Dimensions
101 x 148 mm
Bim and Cad
Revit

Ninfa Collection by FARAONE
You might also like...
Recently Viewed
Download BIM/CAD
Revit
1
Ninfa + Linee guida

Save to:

Conferma la tua posizione

per scoprire le offerte valide nella tua zona

CAP
OK
Usa la mia posizione
Save to: