MATT By FILA Solutions
Matt look wax
MATT is a natural-effect protective wax.
What it's for
• For floor maintenance and matt finish for treatments of terracotta, quarry tiles, tumbled marble and natural stone floors.
• The ideal finishing coat after the application of a water-based water-proofing sealer.
• Ideal on internal walls made of bricks and natural stones, on decorative coverings made of gypsum, manufactured stone and concrete to prevent flaking and strengthen the surface.
Advantages
• Provides natural finish.
• Highly concentrated: can be diluted according to requirements.
• Can be polished to achieve a satin finish.
• Completely removable.
• Has a high self-levelling capacity.
• Dirt and dust repellent.
How to use it
For the protection of floors and bare walls: Dilute MATT slightly to make it more fluid and easier to apply, by adding 200 ml of water per litre of product. On a clean and dry surface, apply one even coat of MATT using fleece (wall brush). Wait until completely dry (about an hour) and then apply a second coat in the opposite direction to the first (i.e. horizontal if previously applied vertically or vice-versa). The floor can be walked on after one hour. For a greater sheen, buff with a floor polisher or a wool cloth. If treating terracotta and highly absorbent natural stone (limestone, sandstone, old quarries, rough quartzite), we recommend a base coat of a waterproofing product such as FOB XTREME or W68.
For maintenance:
Restoring finish (every 2-3 months): after cleaning the surface with a diluted solution of CLEANER PRO (1:200), apply MATT diluting 500 ml of product in 5 litres of water. The floor can be walked on once it is dry. Restoring protection (once a year): apply slightly diluted wax (200 ml of water per litre of product) using a fleece pad, cloth or other applicator. The floor can be walked on once it is dry.
For Anti-flaking treatment: apply an even coat of undiluted MATT to the dry floor using a paintbrush. The treated surface will be dry after approximately one hour.
Packaging
1 litre: boxes of 12.
5 litres: boxes of 4.
HOW TO USE IT
For the protection of floors and bare walls
Dilute FILAMATT slightly to make it more fluid and easier to apply by adding a glass of water per litre of product. On a clean and dry surface, apply one even coat of FILAMATT using a fleece pad or cloth (brush). Wait until completely dry (about an hour) and then apply a second coat in the opposite direction to the first (i.e. horizontal if previously applied vertically or vice-versa). The floor can be walked on after one hour. For a greater sheen, buff with a floor polisher or a wool cloth. If treating terracotta and highly absorbent natural stone (limestone, sandstone, old quarries, rough quartzite), we recommend a base coat of a water-proofing product such as FILAFOB or FILAW68.
For maintenance:
Restoring finish (every 2-3 months): after cleaning the surface with a diluted solution of FILACLEANER (1:200), apply FILAMATT diluting 500 ml of product in 5 litres of water. The floor can be walked on once it is dry. Restoring protection (once a year): apply slightly diluted wax (200 ml of water per litre of product) using a fleece pad, cloth or other applicator. The floor can be walked on once it is dry
Caution:
The product can be removed by using the specific wax-remover for water-based waxes FilaPS87. Not recommended for use on outdoor surfaces or in damp environments and where water remains (bathrooms, showers).
WARNINGS
• Keep out of reach of children.
• Do not disperse into the environment after use.
• Store at room temperature.; Protect can from frost.
TEMPERATURES
Storage temperature: from 5° to 30° C
The product must be applied to material with a temperature of between 10° and 30°C.
COMPOSITION
Aqueous emulsion of hard waxes and polymers with addition of matting agent and other appropriate additives.