WET ECO By FILA Solutions
Wet-effect toning protective treatment
Wet Eco is a wet-effect toning protectant.
What it is used for
- Wet-effect stain- and dirt-repellent protectant for surfaces of unpolished natural stone, unpolished agglomerates and terracotta
- Prevents the absorption of stains and facilitates the removal of dirt
- Is particularly suitable for exteriors and also suitable for interiors
- Prevents dusting of the surface
Advantages
- Environmentally friendly treatment: water-based
- High resistance to heavy traffic
- Resistant to weathering
- Does not peel or yellow
- Facilitates subsequent maintenance
- Does not alter the frostiness of cotto (UNI EN ISO 10545-12)
- Plant-based product: developed with raw materials of organic origin and renewable resources
- VOC free product with low environmental impact with indoor air comfort gold certificate
Application materials
- Unpolished natural stones
- Unpolished agglomerates
- Cotto
How to use
No dilution: ready to use.
Application
Shake before use. On a dry and clean surface, apply WET ECO with a brush or fleece evenly over the surface, impregnating the joints well as well. After 2-3 hours, apply a second coat following the same procedure. Wait at least 12 hours before walking on the surface. Maintenance: diluted solution of CLEANER PRO.
Yield
The following surfaces can be covered with one liter of product:
Unpolished stones and agglomerates - 10/20 m²
Cotto - 7/20 m²
Yields are indicative and are per coat.
