Fila MARBLE AID XT

Flooring protection

ADD TO WISHLIST OR PROJECT

More on Brand

Fila

Italy
Contact the company
Website
Overview
Name of product/article

MARBLE AID XT

Type

Flooring protection

Design Year
2018

MARBLE AID XT is eXTreme, unique and easy to restore, a new way of life for all marble enthusiasts.‎

The Marble Aid XT system is characterized by its strictly professional use, and it’s composed of three elements: a Primer, a Protector and an Activator.‎
The system’s innovation derives from the Primer, which densifies the surface and has been specifically studied and developed to act in perfect synergy with the Protector.‎ It is designed to compensate the natural, microscopic irregularities found in natural stone, guaranteeing perfect micro-coating results with superior adhesion and durability.‎ The Marble Aid XT system produces incomparable performance results.‎

WHAT IT’S FOR:
Protective treatment for marble surfaces against the agression of acids, stains and alkaline substances for professional use.‎

Advantages:
Water-based product with low VOC emissions.‎ Thermal shock resistant.‎ It is renewable and does not affect the material structure of the surface.‎ UV resistant and non-yellowing.‎ It can be used on matte and polished finishes.‎ Applicable on new and existing surfaces, suitable for indoor and outdoor.‎ Certified as safe for food preparation areas.‎ Simple and easy to use.‎

Materials:  
NATURAL STONE, MARBLE AND AGGLOMERATES
Coverage:  up to 10 m2
Application: coverage shown is for guidance purposes only and refers to single coat
Packaging: PROTECTOR : 200 ml bottle ,  ACTIVATOR: 33 ml bottle,  PRIMER: 250ml
TOOLS : short-haired fleece (we recommend a mohair fleece).‎ Vello a pelo corto tipo mohair

PLEASE NOTE
The product is self-leveling, minor application imperfections will disappear in a few minutes.‎ Make sure dust or any other particles do not fall onto the treated surface during the drying process.‎ Do not touch the treated surface during the drying process.‎ Any leftover product can be used for up to one hour after mixing, after which it can no longer be used.‎ Empty the bottle with leftover mixture immediately after use to prevent swelling of the bottle.‎ See Section 13.‎ 1 of the safety data sheet for disposal information.‎ Wait 4 days before carrying out stain resistance tests.‎ The maximum level of  performance is reached after 4 days.‎ For further details please download the safety and technical sheet from our website www.‎ filasolutions.‎ com

Further details
How to use it:
Start with a dry clean surface free from polishing and protective treatments

1. PRIMER APPLICATION
• On a dry clean surface apply 01 PRIMER
• Apply the product with a brush or a synthetic sponge, rub it gently in to ensure it penetrates and remove any excess using a microfibre cloth or absorbent paper
NOTE: on particularly absorbent materials apply a second coat, following the procedure described above.
CAUTION! – Apply the activated FILA MARBLE XT after 30 minutes from the PRIMER application and no later than 1 hour and 30 minutes.

2. MARBLE AID XT PRODUCT PREPARATION
• Pour the content of the 02b ACTIVATOR bottle (33ml) into the 02a PROTECTOR bottle (200ml)
• Rinse the ACTIVATOR bottle with a small amount of the mixture (02a PROTECTOR + 02b ACTIVATOR) and pour the content in the PROTETOR bottle.
• Close the PROTECTOR bottle containing the mixture and shake well for 2-3 minutes.
• Remove the cap and let the mixture sit for 10 minutes.
• Repeat step 3 and 4.
CAUTION! – The activated mixture can be used for up to one hour after mixing at a temperature between 18° and 30° C

3. MARBLE AID XT APPLICATION
• Prepare the fleece (if the applicator is a roller it does not have to rotate, it needs to be restrained in a fixed position)
• Dump the applicator (even if it is new) with water and dry it with a cloth before the use
• Surfaces to be treated must be cleaned with a nonwoven cloth to remove all traces of dirt and dust before applying FILAMARBLE AID XT.
• Make sure that the mixture will cover all the surface to be treated. (Coverage: 10 m2/bottle)
• Pour the product directly on the surface a little at a time. Apply the produt evenly and easily without pressure using the applicator.
• Spread the product equally to cover the whole surface
• DO NOT REPEAT APPLICATION on treated areas.
• Marble Aid XT dries after 8 hours.

4. MAINTENANCE
For daily care use a damp sponge or cloth. We recommend the use of FILACLEANER diluted 1:200 o 1:30 according to the type of dirt.
Dimensions
PROTECTOR : 200 ml bottle
ACTIVATOR: 33 ml bottle
PRIMER: 250ml

You might also like...
Recently Viewed

Save to:
Save to: