MOUNTED MONO SPLIT
Air Conditioner without external unit
Thanks to the Fintek air conditioner without external unit, the engine can be installed directly inside the building, saving space
on the terrace (when present) and maintaining the integrity of the building façade.
It is possible to install the unit wherever there is a water supply and drain connection.
The size of the Fintek ACs and their quietness make the installation very easy everywhere. The perfomances of a water condensed AC are on average 20% higher (compared to AC with external unit) when it comes to cooling result, which means you’re objectively saving money. The water used for the condensing process is in no way polluted or altered as the fluids (cooling fluid and water) are hermetically separated.
The energy of the water is used, as a source of heat in order to enable the physical transformation of the cooling fluid. At the end of the process the water is drained and finds its way back into the natural cycle.
It’s an electronic device which can modify the frequency of the power supply current of an electric engine and , consequently, the engine rotation speed.
A DC inverter air conditioner contains a permanent magnet motor capable of storing energy and ensuring both a very low noise level and an increased efficiency compared to the AC motor.
In this case the conversion of AC current is carried out only once and converted into DC current as well as digitally controlled by
the conversion circuit with an immensely high accuracy. The gas expansion occurs through an electronic expansion valve.
Since the frequency can be changed, at the beginning, the compressori s exploited to the maximum to bring the temperature to the desired level, using a third of the time that is usually needed by classic air conditioners (both in heating and cooling mode).
Fintek water cooled air conditioning systems are equipped with the inverter technology and are all heat pumped.
The frames, the heat exchangers and some electronic boards are designed and manufactured inside our factory in order to guarantee a constant control over all the production steps.
The condensing groups are equipped with a throttling valve to limit the consumption of water. The mono 9000, 12000 and 18000 models include a double valve with a pressure reducer on one channel as a standard equipment.
The 24000 contains one single valve without the pressure reducer. All internal units can be equipped with a wi-fi device as an additional accessory.