Cassette air Conditioner without external unit
Thanks to the Fintek air conditioner without external unit, the engine can be installed directly inside the building, saving space
on the terrace (when present) and maintaining the integrity of the building façade.
It is possible to install the unit wherever there is a water supply and drain connection.
The size of the Fintek ACs and their quietness make the installation very easy everywhere. The perfomances of a water condensed AC are on average 20% higher (compared to AC with external unit) when it comes to cooling result, which means you’re objectively saving money. The water used for the condensing process is in no way polluted or altered as the fluids (cooling fluid and water) are hermetically separated.
The energy of the water is used, as a source of heat in order to enable the physical transformation of the cooling fluid. At the end of the process the water is drained and finds its way back into the natural cycle.
It’s an electronic device which can modify the frequency of the power supply current of an electric engine and , consequently, the engine rotation speed.
A DC inverter air conditioner contains a permanent magnet motor capable of storing energy and ensuring both a very low noise level and an increased efficiency compared to the AC motor.
In this case the conversion of AC current is carried out only once and converted into DC current as well as digitally controlled by
the conversion circuit with an immensely high accuracy. The gas expansion occurs through an electronic expansion valve.
Since the frequency can be changed, at the beginning, the compressori s exploited to the maximum to bring the temperature to the desired level, using a third of the time that is usually needed by classic air conditioners (both in heating and cooling mode).
This four-way cassette has been designed to perfectly fit the standard 600 x 600 mm modules of grid ceilings, to facilitate installation and maintenance. The elegant and compact panel gives the unit a sober and essential line.
Installation and maintenance are simplified thanks to the easy access to the electrical panel by removing the intake grille.
The air diffusion on the four sides of the box allows to distribute the air flow in a homogeneous way throughout the environment.