MULTI SPLIT WALL MOUNTED
Wall mounted Multi-split air conditioning unit
Thanks to the Fintek air conditioner without external unit, the engine can be installed directly inside the building, saving space
on the terrace (when present) and maintaining the integrity of the building façade.
It is possible to install the unit wherever there is a water supply and drain connection.
The size of the Fintek ACs and their quietness make the installation very easy everywhere. The perfomances of a water condensed AC are on average 20% higher (compared to AC with external unit) when it comes to cooling result, which means you’re objectively saving money. The water used for the condensing process is in no way polluted or altered as the fluids (cooling fluid and water) are hermetically separated.
The energy of the water is used, as a source of heat in order to enable the physical transformation of the cooling fluid. At the end of the process the water is drained and finds its way back into the natural cycle.
It’s an electronic device which can modify the frequency of the power supply current of an electric engine and , consequently, the engine rotation speed.
A DC inverter air conditioner contains a permanent magnet motor capable of storing energy and ensuring both a very low noise level and an increased efficiency compared to the AC motor.
In this case the conversion of AC current is carried out only once and converted into DC current as well as digitally controlled by
the conversion circuit with an immensely high accuracy. The gas expansion occurs through an electronic expansion valve.
Since the frequency can be changed, at the beginning, the compressori s exploited to the maximum to bring the temperature to the desired level, using a third of the time that is usually needed by classic air conditioners (both in heating and cooling mode).
The Multi split systems of FINTEK use inverter technology and are all heat pump, we have for each type of multi split multiple versions able to meet all configuration needs.
It is possible, depending on the power of the refrigeration unit, to use internal splitwall units of power protection up to 18,000 btu-h.
The condensation control (water flow) is entrusted to a double valve with pressure reducer for the Dual system, for the Trial and the Panel a single valve is fitted as standard, to which a pressostatic valve can be added as an accessory.
The wi fi device for the indoor units is available as an accessory.