MUROGEOPIETRA By GEOPIETRA®
Reconstructed stone wall tiles
4 July 2016 - CSTB - France
The MUROGEOPIETRA system has brilliantly passed all the material and laying procedure tests required by the French public body CSTB / Centre Scientifique et Technique du Bâtiment.
It has therefore obtained the Technical Assessment (Avis Technique) and the Technical Application Document (TDA) of the Committee (CCFAT) for its suitability for use in innovative construction methods.
MUROGEOPIETRA designed and guaranteed for the installation of MUROGEOPIETRA on external thermal insulation Fassa Bortolo is the first European system tested anti-seismic Eurocode 8 at the French public body CSTB / Centre Scientifique et Technique du Bâtiment.
INSTALLATION AND EVOLVED MATERIALS IN A SINGLE INTEGRATED SYSTEM
GEOPIETRA® has developed a tested system of reconstructed stone materials that responds to the needs of modern construction by creating technically evolved masonry of high aesthetic value.
MUROGEOPIETRA® is sold in a single integrated system that involves the use of the Geocoll system adhesive, the expert laying, on a previously prepared base, of the GEOPIETRA® cladding, and the application of the GeoBi two-component finishing mortar.
Murogeopietra
Murogeopietra is sold in a single integrated system; the reconstructed stone GEOPIETRA®, the Geocoll lime-based adhesive and skimming plaster, and the GeoBi two-component finishing mortar, materials designed in total synergy with each other and according to today's building requirements.
GEOPIETRA®
the most credible ecological cladding stone in the world.
Strictly reconstructed using natural raw materials, each stone is coloured by hand and carefully transformed into a product of high craftsmanship, never the same.
GEOPIETRA® reconstructed stone laid with the Geocoll system adhesive and the GeoBi finishing mortar achieves excellence and becomes inimitable in itself.
- light
- breathable
- resistance and thermal inertia
- low thickness
- frost-proof
- colour-fast
- ecological
- practical and fast
- credibility and naturalness
- high aesthetic and emotional value
GEOCOLL
System adhesive and skim coat based on natural hydraulic lime.
Although there are high-quality adhesives on the market, the laying of GEOPIETRA® reconstructed stone requires very special characteristics, which are not fully satisfied by any of the adhesives on the market, in fact most of them are developed for bonding ceramic tiles (EN12004). In contrast, the Geocoll system adhesive is produced in accordance with EN998 and is specially perfected to improve performance and duration of laying on any type of substrate and on external thermal insulation.
Geocoll is an adhesive specifically designed for the characteristics of GEOPIETRA® reconstructed stone (weight, absorbency and breathability), perfected to improve performance and duration of laying on any type of substrate and in particular on external thermal insulation. Suitable for exteriors and interiors, Geocoll contains natural hydraulic lime, which gives it high smoothness, no vertical slip, breathability and good mechanical properties.
Geocoll, in combination with the Georete glass fibre mesh, constitutes the supporting reinforcement in Mastrosistema and Abitasistema, and is also the ideal product for making reinforced skim coatings on non-stable substrates
GEOBI
Two-component grout
GeoBi is the innovative two-component (dry/wet) grout perfect for finishing GEOPIETRA® reconstructed stone, completely natural and suitable for interior and exterior use. The characteristics of geoBi mortar are similar to those of GEOPIETRA® reconstructed stone, so that the technical characteristics of the finished masonry are uniform. The wall is in fact lighter, breathable and of homogeneous composition.
