![[d]arc awards - Winner](https://cdn.archilovers.com/people/thumb3_d51da986-9ff4-4db3-95cf-c8c7aaca7aaf-log1.gif "[d]arc awards - Winner")
UNDERSCORE INOUT - TOP BEND By iGuzzini
Underscore InOut Side Bend 10mm
• Lengths from 254mm to 7004mm.
• 21 possible combinations.
• Profile (straight lines) or clip (curved lines) installation.
• DALI and DMX interface.
• IP68.
• *Values refer to Top Bend white versions. For all other versions please consult the specific product code's technical information.
• Class III Protected against 20 J shocks IP68: Completely protected against penetration of dust, Protected against the effects of prolonged immersion
Underscore InOut Side Bend 16mm
• Linear luminaire with monochromatic (2900K-4500K), RGB or Tunable White LEDs for installation in fountains and areas around swimming pools (not suitable for installation inside swimming pools).
• Surface mount installation using AISI 316 stainless steel clips.
• Based on a flexible white 24Vdc circuit, with 6 lengths available: 254/504/1004/2004/3004/7004 mm.
• The PWM LED circuit is fully IP68 encapsulated with a very high performance white (external) and opal (emitting surface) polymer sheath: the material allows for use and installation at a maximum temperature of 45 °C in air and 25 °C in water.
• The water must have a pH value between 7 and 8.
• Uniform lighting without visible points is assured along the entire profile of the strip as far as the terminal parts.
• Complete with a single output cable L=5000.
• Complete with stainless steel wires to limit plastic deformation of the body that may otherwise damage the LED circuit.
• Resistant to seawater testing in accordance with EN60598-2-18, UV and solvents.
• IK10 impact resistance.
• Contact temperature <40°.
