LAB23 BEND | Litter bin

Steel and wood litter bin

ADD TO WISHLIST OR PROJECT

More on Brand

LAB23

Italy
Contact the company
Website
Overview
Collection
Name of product/article

BEND | Litter bin

Type

Steel and wood litter bin

Materials

Solid Wood, Galvanized plate, Steel and Wood

Designers

The bin of the Bend collection is made of two profiles, result of a laser-cut steel sheet of 80/10 thickness, on which a bin, with a door that can be opened and a removable bag-holder in galvanized steel sheet of 20/10 thickness, is hooked.‎ The sides, the bottom, and the door of the bin are made in steel sheet of 20/10 thickness, the back has a thickness of 15/10 and the cover of 8/10 with supports of 20/10.‎ On the sides of the bin slats in exotic hardwood are fixed.‎ The slats have a section of 50x30mm.‎ On the legs, support profiles made in steel sheet of 50/10 thickness, bent on the lower part shaping the feet of the bin, are welded.‎ These come with holes of 10 mm diam.‎ for the fixing to the ground through specific bolts (not provided).‎
For the realization of this product, Steel EN10111DD11 is used and later treated with a cycle of sandblasting, cataphoresis and powder coating.‎ Such cycle is meant to guarantee the protection of the painted products, in an environment of C4 corrosion class, as requested by the UNI regulations EN ISO 12944-2.‎ The products are eventually polyester-powder coated with RAL colours at choice.‎
The galvanized steel used is steel EN10346DX51D+Z and, unless otherwise stated, is not painted.‎
The wood used is either Iroko or Okume, treated with natural, water-repellent, UV ray resistant oils.‎
Weight of steel 33 kg
Capacity 70 lt

Dimensions
H: 1000 mm
D: 450 mm
L: 683 mm
Lt: 70

Bend Collection by LAB23
You might also like...
Recently Viewed

Save to:

Conferma la tua posizione

per scoprire le offerte valide nella tua zona

CAP
OK
Usa la mia posizione
Save to: