LAB23 TOWER

Steel litter bin

ADD TO WISHLIST OR PROJECT

More on Brand

LAB23

Italy
Contact the company
Website
Overview
Name of product/article

TOWER

Type

Steel litter bin

Materials

Wood, Steel, Multi-Layer Wood

The strong structure of the TOWER bin is made in steel of 50/10 thickness.‎ The door of the bin is made in steel sheet of 15/10 thickness and is covered with a multi-layered exotic wood panel of 10 mm thickness, which is milled to enhance the look of the slats.‎ The panel is fixed to the door through specific bolts.‎ The door is fixed to the structure of the bin through 2 screws M6 serving as a hinge and for the closing there is a triangular key lock.‎ Inside the bin, there is a waste container, made in galvanized steel of 50/10 thickness and dimensions 30x230xH 400 mm.‎ This one is placed on a plate of 50/10 thickness, welded to the bin.‎ On the bottom there are 2 holes of 10 mm diam.‎ for the fixing to the ground through specific bolts (not provided).‎
For the realization of this product, Steel EN10111DD11 is used and later treated with a cycle of sandblasting, cataphoresis and powder coating.‎ Such cycle is meant to guarantee the protection of the painted products, in an environment of C4 corrosion class, as requested by the UNI regulations EN ISO 12944-2.‎ The products are eventually polyester-powder coated with RAL colours at choice.‎
The galvanized steel used is steel EN10346DX51D+Z and, unless otherwise stated, is not painted.‎
The wood used is either Iroko or Okume, treated with natural, water-repellent, UV ray resistant oils.‎
Weight 50 kg
Capacity 20 lt

Dimensions
Length: 250 mm
Height: 1200 mm
Width: 250 mm
Capacity: 26 Lt

You might also like...
Recently Viewed

Save to:

Conferma la tua posizione

per scoprire le offerte valide nella tua zona

CAP
OK
Usa la mia posizione
Save to: