ENKI | Sofa
Fabric sofa with removable cover
Construction – Settees and armchair: armrest and backrest in 3-layer particleboard and MDF. Seat: mechanically-soldered steel and rods of multi-ply. Footstool: seat in 3-lawer particleboard and panels of multi-ply. Panels clad in polyether foam and high resilience polyurethane Bultex foam. The entire structure is clad in 200 g/m2 polyester quilting. Round legs Ø 20 mm in matt black lacquered steel. Choice of 2 heights: H 10 cm or H 13 cm.
Comfort – Suspension of seat via elastic webbing. Seat cushion in high resilience polyurethane Bultex foam 36 kg/m3 – 2.8 kPa, 42 kg/m3 – 4.8 kPa and 200 g/m2 polyester quilting. Structure of seat clad in 200 g/m2 polyester quilting. Backrest in high resilience Bultex foam 36 kg/m3 – 2/8 kPa, 26 kg/m3 – 1/4 kPa and 200 g/m2 polyester quilting. Armrests in high resilience Bultex foam 26 kg/m3 – 1.4 kPa and 200 g/m2 polyester quilting. High back cushions filled with goose feathers and down, of which 15 % feathers and foam, with 3 mm thick sheet ABS rear reinforcement (74 x 51 cm except armchair: 60 x 41 cm). Low back cushions (may replace the high back cushions on the two settees) filled with goose feathers and down, of which 15 % feathers (74 x 40 cm). Set of 2 small scatter cushions 40 x 50 cm for the 1-arm settees or asymmetrical settees, to finish the corner of a composition.
Making-up – Structure of back/armrest and seat : 5 mm baguette stitching. Seat and back cushions : 8 mm bourrelet stitch. Covers are removable (NB except leather).
Covering materials – This classic seat, which offers both standalone settees and armchairs and corner compositions, is most ideally covered in leather or Alcantara, but also works well in wools or velvets. It may be given a bi-material and/or bicolour treatment, with structure + seat in one covering material/colour and the back cushions in another.