COLORITE BETON By MAPEI
Acrylic decorative painting finish
Colorite Beton is a semi-transparent acrylic paint.
WHERE TO USE COLORITE BETON
For painting concrete structures, reinforced concrete and general cementitious surfaces with a coat of semitransparent paint, leaving the “form-work” or “natural” finish of the piece visible and homogenising the colour.
The special formulation of the product makes it particularly suitable for protecting surfaces against damage caused by CO2, SO2 and sunlight. The longlasting, durable protection is also guaranteed by the product’s good repellence to water and its moderate permeability to vapour.
Some application examples of Colorite Beton
- For painting concrete and reinforced concrete surfaces where the colour of the substrate requires homogenising while leaving the “form-work” or “natural” finish of the cementitious structure visible.
- Paint for protecting general cementitious surfaces exposed to aggressive pollution agents in industrial environments, such as exhaust gases and acid rain, or to prevent damage due to carbonation.
TECHNICAL CHARACTERISTICS of COLORITE BETON
Colorite Beton is a semi-transparent paint for external walls, made up of non-saponifiable, pure acrylic resin in water dispersion.
Colorite Beton protects cementitious substrates against damage caused by CO (carbonation) and SO .
Colorite Beton is resistant to all climatic conditions and the aggressive attack of smog, salt and sunlight, and provides a long-lasting protective coat for the substrate.
Colorite Beton protects the substrate and leaves an attractive finish which evens out the colour without hiding the surface structure.
Colorite Beton is available in 4 shades of grey in the standard range of colours. Further colours may also be created according to individual samples by using the ColorMap automatic colouring system.
Colorite Beton meets the requirements of EN 1504-9 (“Products and systems for protecting and repairing concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use and application of systems”), and the requirements of EN 1504-2 (“Surface protection system for concrete”) for class: surface protection products – coating (C) – ingress protection (1.3) (PI) (ZA.1d) + moisture control (2.2) (MC) and increasing resistivity (8.2) (IR) (ZA.1e).
