NIVORAPID By MAPEI
Skim coat and cementitious finish for plaster
Nivorapid is an ultra-fast setting, thixotropic, cementitious levelling compound for horizontal and vertical surfaces, from 1 to 20 mm thick layer.
WHERE TO USE NIVORAPID
Nivorapid is used for repairing, levelling and smoothing interior floors, walls, steps and arrises where very rapid hardening and drying are required.
Some application examples
· Smoothing concrete slabs and screeds made with Mapecem, Mapecem Pronto, Topcem, Topcem Pronto, anhydrite, and magnesium based screeds as well as cast asphalt.
· Smoothing terrazzo, ceramic, natural stone or heated floors.
· Smoothing concrete walls, cementitious renders, foamed concrete blocks and ceramic.
· Repair or levelling steps, landings and edges of pillars.
· Filling depressions and holes in floors, walls and ceilings.
By adding Latex Plus to Nivorapid, levelling with excellent bonding strength on metal surfaces, old rubber floors, PVC, needlepunch, chipboard, parquet, linoleum or similar (see technical data sheet for Latex Plus) is obtained.
TECHNICAL CHARACTERISTICS OF NIVORAPID
Nivorapid is a grey-brown powder composed of cementitious binders, selected graded aggregates and synthetic admixtures prepared according to a formula developed in the MAPEI research laboratories.
Nivorapid mixed with water becomes an easily workable thixotropic paste with high bonding strength to substrates and rapid drying which allows subsequent installation operations for floor and wall coverings, or painting, within only 4-6 hours after application.
Nivorapid hardens without shrinkage and without the formation of cracks or crazing. It develops high compressive and flexural strength and is very resistant to impact and abrasion.
